DEEP Sea Standard

NEMA 6P / IP68

Rating: 10m, 30ft

Material: Stainless Steel Type 316

Sizing: 20" x 20" to 30" x 30"

Industries: Automation & Control, Infrastructure, Maritime, Oil & Gas, Renewable Energy, Tunnels & Underground

Specifications:

  • NEMA 6P, (4, 4X) and IP68, (IP67)
  • Submersible up to 30ft / 10 meters
  • Manufactured from 14 gauge Type 316 Marine Grade Stainless Steel
  • Seams continuously welded and ground smooth
  • Single piece Neoprene Gasket
  • Stainless Steel Fasteners and Hardware
  • Mounting brackets on rear of enclosure
  • Weld Studs installed for mounting Internal Backing Plates and Terminal Blocks
  • Grounding stud  on enclosure body for Earthing and Bonding
  • Internal Ribs for Greater Depths
  • Custom Sizes Available on request

Finishes:

  • # 3 polish finish
  • Paint and Powder Coat Finishes available in a variety of colours

Accessories:

  • Hinged Lid
  • Internal Back Plate
  • Hinged Swing Out Panel
  • Alternative Powder Coat finishes are available
  • EMC / EMI /RFI Shielding
  • IP68 Stainless Steel Cable Glands / Cord Grips
  • Flurosilicon (FVMQ) Gasket resistant to Fuels and Oils

Modifications and Customisation:

SLAYSON excels at modifying and customising all our products to meet your exact specifications. Contact our experienced Engineers about your project specific solution.

Enquiries at sales@slayson.com

The SLAYSON DEEP-SEA Standard Series has been engineered with internal ribbing which provides protection at greater depths under higher pressures. It is rated NEMA 6P/IP68 for partial or prolonged submersion, and will protect against dust and water ingress up to depths of 30ft/10m. The DEEP-SEA Standard Series comes standard in corrosion resistant 14g 316 Marine Grade Stainless Steel or Aerospace Grade Aluminum, making it capable of protecting vital electrical equipment in harsh environments.

SLAYSON DEEP-SEA Standard enclosures come in an array of finishes, and can be easily modified with accessories such as hinged lid, EMC/EMI/RFI shielding, a fluorosilicone gasket and more. All DEEP-SEA Standard enclosures come with stainless steel fasteners and hardware. SLAYSON design and engineer teams work closely with clients to ensure delivery of the exact enclosure needed.

If you cannot find the size you need, SLAYSON will design and engineer a custom DEEP-SEA Standard enclosure to meet your requirements.


Part Number Material Code Builder

BSB – 316 Marine Grade Stainless Steel (14 gauge) (metric)

BAB – Aluminium (0.064″) (metric)

PartNumber Height (A): mm Width (B): mm Depth (C): mm Mounting Height (D): mm Mounting Width (E): mm Back Plate Part Number Back Panel Height: mm Back Plate Width: mm Gauge
BSB757545 750 750 450 650 800 ASPI2626 650 650 14
BSB756545 750 650 450 650 700 ASPI2622 650 550 14
BSB707040 700 700 400 600 750 ASPI2424 600 600 14
BSB706040 700 600 400 600 650 ASPIS2422 600 550 14
BSB656535 650 650 350 550 700 ASPI2222 550 550 14
BSB606030 600 600 300 500 650 ASPI2020 500 500 14
BSBI505020 500 500 200 400 550 ASPI1616 400 400 14
BSB504020 500 400 200 400 450 ASPI1612 400 300 14

Slayson's 24/7 support

At SLAYSON, we look after you just like we would your equipment; with the upmost of care and expertise. Get in touch today to discuss your requirements.

Enclosures